AvL Proprietary and Confidential
Content is Subject to Change without Notice Page 103 of 195
Modem Minimum Wait Time – 6.5.11
Peak Dwell Iterations – 6.5.6
Peaking Azimuth Travel Limit – 6.5.6
Peaking Elevation Travel Limit – 6.5.6
Peaking Ignore Noise Level – 6.5.1
Peaking Polarization Travel Limit – 6.5.10
Plateau Peaking Coarse Azimuth Velocity – 6.5.9
Plateau Peaking Coarse Elevation Velocity – 6.5.9
Plateau Peaking Fine Azimuth Velocity – 6.5.9
Plateau Peaking Fine Elevation Velocity – 6.5.9
Polarization Dwell Iterations – 6.5.10
Polarization Peak Coarse Azimuth Velocity – 6.5.10
Polarization Peak Coarse Elevation Velocity – 6.5.10
Polarization Peak Fine Azimuth Velocity – 6.5.10
Polarization Peak Fine Elevation Velocity – 6.5.10
Polarization Peaking Enabled – 6.5.10
Polarization Peaking Step – 6.5.10
Scan Azimuth Velocity – 6.5.1
Scan Elevation Velocity – 6.5.1
Scan Polarization Velocity – 6.5.10
Skip Coarse Peak If Tx Enabled – 6.5.11
Slow Scan Azimuth Velocity – 6.5.1
Slow Scan Elevation Velocity – 6.5.1
Slow Scan Polarization Velocity – 6.5.1
Step Pattern Coarse Azimuth Velocity – 6.5.7
Step Pattern Coarse Elevation Velocity – 6.5.7
Step Pattern Coarse Peaking Azimuth Step – 6.5.7
Step Pattern Coarse Peaking Elevation Step – 6.5.7
Step Pattern Fine Azimuth Velocity – 6.5.8
Step Pattern Fine Elevation Velocity – 6.5.8
Step Pattern Fine Peaking Azimuth Step – 6.5.7
Step Pattern Fine Peaking Elevation Step – 6.5.7
Tracking Method – 6.4.1
6.1.4 Feed Parameters
Feed Parameters relate to the movements and limits of the variety of feed based model options.
Elevation Inc Offset – 6.6
Line Scan Polarization Adjust Flag – 6.6
Manual Polarization – 6.6
Polarization Center Switch Is Interlock – 6.2.4 & 6.6
Polarization Feed Type – 6.6
Polarization Motor Abs Enc Offset – 6.6
Polarization Motor Abs Enc Scale Factor – 6.6
Polarization Motor Scale Factor – 6.6
Polarization Position Move Maximum PWM – 6.6
To Next Page
Loading...
Need help?
General