AvL Technologies AAQ Antenna Controller - Controller Hardware Specification

AvL Proprietary and Confidential
Content is Subject to Change without Notice Page 12 of 195
1.3.6 Module – Device
A Device Module file enables inter-operability and communication between the controller and a specific
device. An example of this type of vendor device module would be one created specifically for the
iDirect Evolution 8000 Modem.
1.3.7 Module – Function
A Function Module enables specific unique functions in the controller. An example of a function module
is the Step Track Module.
More details on the software architecture can be found in Chapters 4, 6 and 7.
1.4 Controller Hardware Specification
The two basic AAQ Controller components are the ACU and the NAV RIOM.
ACU
 Size: approximately 8.3” H x 7.4” W x 1.4” D
 Weight: 3 lb.
 Communication Ports: 2 RS-232 ports, 1 Ethernet port
 LNB Voltage Output: 0, 13 VDC, 18 VDC
 Input Power: 24 to 32 VDC, 14A maximum
 Operating Temperature: -40°C to +60°C
 Humidity: 0 to 95% RH Condensing
 Environmental Protection: IP65
 Circuit Protection: internal resettable 15A fuse
NAV RIOM (Remote Input Output Module)
 Size: approximately 4” H x 1 7/8” W x 1 ½” D
 Weight: 0.5 lb
 GPS Receiver and Patch Antenna
 Magnetic Compass, with error correction
 Digital Inclinometer – 2 axes
 Environmental Protection: IP66
 Operating Temperature: -40°C to +60°C
 Humidity: 0 to 100% RH Condensing