AvL Proprietary and Confidential
Content is Subject to Change without Notice Page 192 of 195
8.5.1 Changing to Manual GPS
The “GPS Source” configuration item is located in the “Configuration” window under, VIEW>
CONFIGURATION>Core Tab.
Figure 8.5.1 – GPS Source to Manual
Selecting “Manual” from the “GPS Source” pull down menu will direct the AAQ controller to use the
values listed under “Manual Latitude” and “Manual Longitude” for the GPS source. These values are
also listed under the “Configuration” window, VIEW>CONTROLLER CONFIGURATION> Core tab.
To Next Page
Loading...