AvL Proprietary and Confidential
Content is Subject to Change without Notice Page 99 of 195
6.1.1 Core Parameters
Core Parameters generally address the relationship between the pedestal mechanism, various
related sensor devices and the code variables that control them. All parameters are listed here along
with the section number where their information can be found.
Auto Stow On Movement – 6.2.2
Auto Stow Speed – 6.2.2
Auto Stow Speed Time – 6.2.2
AvL Compass Com Port – 6.3.5
AvL Compass Com Port Settings – 6.3.5
Azimuth CCW Limit – 6.2.1
Azimuth CCW Limit Switch is Interlock – 6.2.4
Azimuth CW Limit – 6.2.1
Azimuth CW Limit Switch is interlock – 6.2.4
Azimuth Motor Abs Enc Offset – 6.3.4
Azimuth Motor Abs Enc Scale Factor – 6.3.4
Azimuth Motor Scale Factor – 6.3.4
Azimuth Pot Offset – 6.3.4
Azimuth Pot Scale Factor – 6.3.4
Azimuth Stow Is Interlock – 6.2.4
Azimuth Stow Pedestal Position – 6.2.2
Circular Polarization Center Position – 6.3.6
Compass Heading Offset – 6.3.2
Compass Scan Width – 6.3.4
Controller Name – 6.3.6
Controller Serial Number – 6.3.6
Cross Polarization Disable – 6.3.4
Declination Override – 6.7.1
Digital Input 0 (through 4) Is Interlock – 6.2.4
Digital Output Digital Out 1 (through 6) – 6.2.4
Elevation Compass Position – 6.3.2
Elevation Down Limit – 6.2.1
Elevation Down Limit Reflector Mounted – 6.2.3
Elevation Down Limit Switch Is Interlock – 6.2.4
Elevation Down Stow Limit – 6.2.1
Elevation Motor Abs Enc Offset – 6.3.4
Elevation Motor Abs Enc Scale Factor – 6.3.4
Elevation Motor Scale Factor – 6.3.4
Elevation Stow Position – 6.2.2
To Next Page
Loading...
Need help?
General