AvL Proprietary and Confidential
Content is Subject to Change without Notice Page 35 of 195
4.2.5 Command Pane
Figure 4.2.5a - Command Pane
The Command Pane contains the main controls for antenna movement. Each control is an LED
indicator button with a descriptive label. When clicked the action associated with the control is
performed. When the controller is performing an action the associated control LED will become
active (green) indicating that it is the current command.
Activates the manual control functions
Moves antenna to the “Home” position, initializes sensors, and reads the
compass
Acquires the selected satellite (Home must be completed first)
Moves the antenna to a specific position (Home must be completed first)
Finds the signal peak in accordance with fine pointing device
Peaks on the signal in accordance with coarse pointing device
Tracks the signal in accordance with option specified
Flips the pol 90 degrees to simplify “Cross Pol” testing
Figure 4.2.5b - Command List
To Next Page
Loading...
Need help?
General