CHAPTER 4 – Installation
Chap. 4
- 15/20 -
TYPE OF
HOISTING
HANDLING
Handling the
electrical cabinet
• The machine’s electrical cabinet (6) has four eyebolts (7) located on the upper
section of the cabinet to allow for hoisting using a specific hoisting device,
such as, for example, a crane (1) and four ropes (2).
• If the cabinet has been packed in a barrier bag (3) for shipping, it may be
handled using a lift-truck (5).
• Once the protective wood crate has been removed (4) the electrical cabinet
may be handled using a crane (1) and four ropes (2) connected to the four
eyebolts (7).
To Next Page
Loading...