217601–426 /17 F70 Series
Image C–10
Calibration for Maintain white point while dimming
1. Allow unit to run for at least 15 minutes to enable stable light output.
2. MWPWD must be turned off during the calibration
3. Select RealColor mode preset: Native. Menu -> Image -> Advanced settings -> Realcolor P7
Image C–11
4. Select desired BrilliantColor mode Native. Menu -> Image -> Advanced settings -> BrilliantColor
Image C–12
5. Select desired Smear reduction mode SRP™ Off.Menu -> Image -> Advanced settings -> Smear
reduction
Color calibration guide
To Next Page
Loading...
