Warning
To reduce the risk of burns, fire, electric shock, or injury to persons:
•
Do not allow to be used as a toy. Close attention is necessary when this
embroidery machine is used by, or near children.
• Use this embroidery machine only for its intended use as described in this
manual.
• Use only attachments recommended by the manufacturer, as contained in
this manual.
• Never operate this embroidery machine if it has a damaged cord or plug,
if it is not working properly, if it has been damaged or is wet. Contact
Barudan America technical support.
• Never operate the embroidery machine with any air openings blocked.
Keep ventilation openings of the machine free from the accumulation of
lint, dust, and loose cloth.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
• To disconnect, turn all controls to the off position, then remove the plug
from the outlet.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the
cord.
• Keep fingers away from all moving parts. Special care is required around
the sewing machine needles.
• Always use the proper needle plate. The wrong plate can cause the needle
to break.
• Do not use bent needles.
• Do not pull or push fabric while stitching. It may deflect the needle,
causing it to break.
• Switch the sewing machine off when making any adjustments in the
needle area, such as threading the needle, changing a needle, replacing the
bobbin, changing the presser foot, or the like.
• Always unplug the machine from the electrical outlet when removing
covers, lubricating or when making any other user servicing adjustments
mentioned in the instruction manual.
1-4 X Series Mechanical Guide
To Next Page
Loading...