Barudan BEXS - Saving Designs to a USB Flash Drive

５‐１２
4. Saving Designs to a USB Flash Drive
Instructions for storing designs from a BEXS Automat to an USB Flash Drive
4-1. Saving Designs
1. Press the Design Loading/Downloading Key .
2. Press the A-key,
to display the Memory to USB Flash Drive downloading
screen.
To go back to the Design Loading screen, press the A-key,
again.
3. Use the Jog keys and select a folder on the USB Flash Drive you want to save to.
Press the Origin key or the F-key, to display the designs in the folder.
4. Press the E-key,
to show the Memory design list.
To display the design information, press the C-key,
.
To go back to the USB Downloading screen, press the E-key,
.