Barudan BEXS - ２．Before Using a USB Flash Drive

５‐４
2. Before Using a USB Flash Drive
1. Outline
The USB Flash Drive can be used for not only saving data but also for the following:
1. Storing Design Files
-Save / load design files in FDR format (.U01).
-Save / load design files in the Network format (.PRJ). *1
-Store design files in TFD format (.DST and .DSB). *2
-Bitmap image for each design file and image can be viewed on computers.
-Memory Back-up of all design files stored in the machine.
2. System Software Update
Software can be updated using a USB Flash Drive.
3. Editing
The design files in the USB Flash Drive can be edited on computers.
*Designs in PRJ format can be edited using LEM Server software.
*1. PRJ format consists of a design file, Program parameters and a Bitmap Image file.
*2. The Automat cannot save the TFD format file to the USB Flash Drive. Use a computer
to save TFD format files on the USB Flash Drive.