４‐１１
4. Set the default value using the keys below.
(A-key) : The default value decreases by 100 stitches.
(B-key) : The default value increases by 100 stitches.
(C-key) : Press this button with above.
The default value decreases or increases by 1,000 stitches.
(D-key) : Show the Numeric Entry Dialogue.
Referring the
Chapter 3 10. Numeric Entry Dialogue Box
and enter
the value..
5. Press the G-key,
to enter and apply the value you chose.
To Next Page
Loading...