４‐１８
9-5. Lubrication Setting Column
Item Function Range Default
M．Time
(Machine running time)
The time before the lubrication
1-100
Hours
5
Stitch
(Stitch count)
The stitch count before the lubrication
1-100
10000 stitches
15
10000 stitches
Cycle
(Frequency)
The frequency of the lubrication to the
sewing head.
0: Automatic lubrication inactive and the
lubrication requirement message will
NOT appear.)
-1: Automatic lubrication inactive but
shows the lubrication requirement
message.
1-10: The frequency of the lubrication to
the sewing bed before a lubrication to
the sewing head is executed.
(Example) A setting of 5, lubricates the
sewing bed 5 times before lubricating the
sewing head one time.
－1-10
Cycles
2
Cycles
When a manual lubrication is executed, the time and stitch counters are reset.
*After the
manual feature is executed, the time, stitch counter, and cycle are reset.
*After the manual feature is executed, the time and stitch counter are reset.
To Next Page
Loading...