６‐１６
5. Select the item that you want to change the value.
6. Press the A-key below the
icon to decrease the value.
Press the B-key below the
icon to increase the value.
When there are any changes made, a confirmation screen appears.
*Refer to
Chapter 3. 12. Confirmation Message
.
Item Function Range Default
Thickness Thickness of the fabric measured in millimeters.
0.0～9.9mm
0.0mm
Back Thread Rate
Ratio of the Bobbin thread to Top thread in Satin
stitches.
0～100％ 50％
Needle Height
Needle height adjustment for chenille machines
in millimeters.
0～2.0mm
0mm
Adjusting Value Calibration ratio of thread consumption.
50～200％ 100％
To Next Page
Loading...