Baumuller b maXX 3000 - 11 Accessories and Spare Parts; Cables; Cable Power Supply-Device

177
of 218
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11
11ACCESSORIES AND SPARE PARTS
In this appendix the accessory-/spare parts for the devices of the series BM3000,
BM3200, BM3300 are listed. Do not hesitate to contact our product management for in-
quiries and suggestions referring to spare parts.
11.1 Cables
11.1.1 Cable power supply-device
1)
The length of the cable between mains filter and power supply, in order to comply with the EMC-Guideline, is irrelevant.
2)
The laying procedure is not specified. The DC link connections must be laid DC compliant.
Device Cross-section Maximum Length
1)
Connection to the device
2)
BM300X 1 mm² bis 4 mm² optional flexible cable with cable lug M4
Device Cross-section Maximum Length
1)
Connection to the device
2)
BM320X
BM330X
BM321X
BM331X
4 x 1 bis 2.5 mm
2
(AWG 18 - 14)
optional flexible cable
with/without wire end ferrule
(screw contact)