Design and Function
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11
55
of 218
4
4.3 UL notes
The notes below must be observed in case you consider UL 508 C.
ZRequirements to the energy supply: power supply– on page 27
ZRequired environmental conditions– on page 29
ZRequirements for the motor temperature sensors– on page 95
ZConnections– from page 120
Connections from ZPage 120– to ZPage 145–
n For use with grounded wye sources only or equivalent.
n Note the maximum surrounding air temperature.
n Use in a pollution degree 2 environment only.
n Motor over-temperature sensing is required. Drive intended to
be used with motors that have thermal sensor mounted in or on
the motors.
Connection see ZConnecting diagrams– from page 98
n Position of wiring terminals to indicate the proper connec-
tions for the power supply, load, control circuit, and similar
devices refer to ZPage 120–.
n Note tightening torque values marked for field terminals.
To Next Page
Loading...