47
of 218
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11
4DESIGN AND FUNCTION
In this chapter the basic design of the device BM3000, BM3200, BM3300 is described
and the type code on the devices is described.
NOTE!
The devices of the BM3000, BM3200, BM3300-series are intended for the use in the
„Second environment“ (industrial environment) compliant with EN 61800-3. EMC-in-
terferences can appear, if it is connected to the public supply.
Also see ZAppropriate use– from page 12.
NOTE!
Components of Baumüller Nürnberg GmbH are intended to be installed into commer-
cially available control cabinets
There are a number of reasons, why the components should be operated in commer-
cially available control cabinets. Especially the following points are assured by install-
ing these components into the control cabinet:
m The protection against contact, requested by the user can be implemented.
m The stated thermal environment conditions (temperature, relative air humidity,
cleanliness of the coolants,...), in the technical data of the components and devic-
es is assured.
m The stated mechanical environment conditions (technical data of the components
and devices (vibration, shocks,....) is assured.
m The stated notes in the technical data for the EMC-compatible configuration and in
order to obtain an EMC-compatible design (shielding concepts, installation princi-
ples, leadthroughs,...) can be implemented.
To Next Page
Loading...
Need help?
General