71
of 218
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11
5TRANSPORT AND PACKAGING
5.1 Safety notes for transport
5.2 What to observe when transporting
For initial transport of a device, it is packed at the manufacturer's plant. If the device must
be transported, ensure that the following conditions are met throughout the entire trans-
port:
m Climate class 2 K 3 as per EN 60721-3-2
m Temperature range - 25 °C up to + 70 °C
m Vibration, shock, continuous shock class 2 M 1 as per EN 60721-3-2
NOTICE!
Damage due to unauthorized transport!
Transport handled by untrained personnel can lead to a substantial amount of mate-
rial damage.
m The unloading of the packages upon delivery as well as the in-house transport
should only be done by trained personnel.
m Contact Baumüller Nürnberg GmbH sales office if necessary.
WARNING!
Danger of physical impact!
Secure devices against falling down.
Therefore:
m Take suitable measures, such as supports, hoists, straps, etc., to ensure that de-
vice cannot fall down.
m Use appropriate means of transport.
To Next Page
Loading...
Need help?
General