Baumuller b maXX 3000 User Manual

EC - Declaration of Conformity Doc.-No: 5.12060.03
Date: 14-Jun-2016
according to Machinery Directive 2006/42/EC
The Manufacturer: Baumüller Nürnberg GmbH
Ostendstraße 80-90
90482 Nürnberg, Germany
declares, that the products:
Designation: Compact Servo Unit b maXX 3000 with safety relay
Type: BM3301-ST20, BM3302-ST20, BM3302-ST20, BM3304-ST20, 
BM3311-ST20, BM3312-ST20, BM3313-ST20
manufactured since: 22-Oct-2013
are developed, designed and manufactured in accordance with the Machinery Directive 2006/42/EC. These products com-
ply with the requirements of the EMC Directive 2014/30/EU and the Low Voltage Directive 2014/35/EU.
Applied harmonized standards:
Authorized person to compile the technical files: 
Name: Engelbert Meier, Baumüller Nürnberg GmbH, Section AES
Address: Ostendstraße 80-90, 90482 Nürnberg, Germany
Notified body executed the EC type-examination procedures according to Machinery Directive 2006/42/EC:
Name: TÜV Rheinland Industrie Service GmbH 
Address: Am Grauen Stein, 51105 Köln / Germany
Identification number: 0035
Registration numbers: 01/205/5354.00/13
Attention should be paid to the safety instructions in the manual.
This product is to be used in machinery and must not put into operation until the machinery, into with it is incorporated, has been declared
to be in conformity with the Machinery Directive 2006/42/EC.
Nuremberg / 14-Jun-2016
Location / Date
Subject to change of this declaration of EC conformity without notice. Actual valid edition on request.
Norm Title
EN 62061:2016-05 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic
control systems
EN ISO 13849-1:2008
AC: 2009
Safety of machinery - Safety-related parts of control systems, 
Part 1: General principles for design
EN 61800-5-1:
2008-04
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements. Electrical, thermal and energy
EN 61800-5-2:2007 Adjustable speed electrical power drive systems. Part 5-2: Safety requirements. Functional
EN 60204-1:2006
A1:2009
Electrical equipment of machines Part 1:General requirements
EN 61800-3:2012-09 Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific test methods
IEC 61508, 
Teil 1-7:2010
Functional safety of safety-related electrical, electronic and programmable electronic control systems
Declaration of Conformity
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11
211
of 218
B

Baumuller b maXX 3000 Specifications

General

Brand	Baumuller
Model	b maXX 3000
Category	Control Panel
Language	English