10-6
From here by pressing Key 2 you will get back to MAP mode (Screen 38 or 47). To select another
beacon from the Ten Nearest (Screen 45) you press Key 1. If you press Key 3, IDENT, the unit will
mimic the Morse code ident for the chosen beacon on the internal beeper (and on the external alarm if
you switched this on in Screen 23, NAV Mode Customisation Screen).
If you want to view the area immediately around the chosen beacon, press Key 4. This will call Screen
10A which is very similar to screen 10, the View and Edit User Waypoint on the Map Screen. Screen
10A will revert back to screen 46 after 30 seconds with no key or joystick activity or can be cancelled
by pressing Key 1, PREV PAGE.
To obtain a DIRECT TO for the chosen beacon all you have to do is press Key 5, labelled DIRECT
TO, and you will switch back to (Screen 47) MAP mode with the selected DIRECT TO activated.
To Next Page
Loading...