Appendix 01 - 1
APPENDIX 01: Warning Screens
RAM Lost Warning
Screen 51: RAM Lost Warning Screen
This screen is displayed after power-on if any of the RAM areas are found to be corrupted. Key 1
invokes a RAM clear to be carried out on the failed area and the last known good values to be reinstated.
If the last known good values are also suspect, a full RAM clear of the affected data will be carried out.
Memory Battery Warning
Screen 52: Memory Battery Warning Screen
This Screen will appear if during initialisation the memory battery voltage is found to be low. It can
also appear at any time during operation if the internal battery falls below a pre-determined limit.
By pressing Key 1 you can return to whichever Screen was showing before the low voltage condition
was detected. If this screen is displayed, you should have your memory battery replaced by
your Bendix/King dealer at the earliest possible opportunity.
To Next Page
Loading...