SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
1 – 17
Volume 1 2 Proper Use
1
2 Proper Use
The measuring system SENSseries LB 480 is a detector which,
depending on its design, can be used for different measurement
tasks:
– Level measurement
– Monitoring limit values
– Density measurement
The measurement system is designed for the continuous monitoring
and detection of levels and limit levels of liquids and bulk solids in
bins, or to determine the density of liquids in tanks and pipes. The
proper use is defined in the project planning stage by BERTHOLD
TECHNOLOGIES, the system delivered may be used only for this
purpose.
If the detector is used in a way which is not provided for during the
project planning stage and which is not described in the User’s Man-
ual, then the detector's protection is compromised and the guaran-
tee claim becomes invalid.
BERTHOLD TECHNOLOGIES only accepts liability for / guarantees
the correspondence of the systems of the SENSseries LB 480 to its
published specifications. The detectors of the SENSseries may only
be installed in an undamaged, dry and clean condition. Alterations
and modifications to the system components are not allowed.
Repairs to the detector may only be made if expressly authorized
by the operating manual.
Conformity to standards The standards and guidelines the SENSseries complies with are
itemized in the CE conformity declaration.
To Next Page
Loading...
