SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
2 – 171
Volume 2 2 Installation
2
2 Installation
Please pay attention to:
– the national safety and accident prevention regulations
– the national assembly and installation directions (for example,
EN 60079)
– the generally accepted engineering rules
– the information on transport, assembly, operation, service,
maintenance in this User’s Manual
– the safety instructions and information in this User’s Manual
and the enclosed technical drawings and wiring diagrams
– the parameters, limit values and the information on operating
and ambient conditions on the type labels and in the data
sheets
– the labels on the device
Health hazards due to radiation!
Radiometric measuring devices utilize radioactive substances.
Danger due to radioactivity may occur if persons are exposed to
radiation as a result of improper working with the measuring sys-
tem.
Only persons who are trained in the handling of radioactive materi-
als and possess the necessary know-how and skills are allowed to
work with these measuring systems, see Volume 1, chapter 3,
"Qualification of Personnel", page 1-19. Construction site personnel
with experience in transporting heavy components may also be
commissioned to carry out the installation. This construction site
personnel, however, has to be guided by qualified persons; the
Radiation Safety Officer has to be consulted for transportation and
installation of the source.
Careful conformance to these regulations ensures that no hazard
exists for persons using the devices.
Please be sure to comply with the Radiation Protection
Guidelines applicable in your country and observe the Radi-
ation Protection Instructions in chapter 9, page 1-113.
To Next Page
Loading...
