54733-10BA2L
3 – 328 02.2017
Menu Structure Volume 3
2.15 Signal Condition
Menu path: Device Config Setup Signal Condition.
This menu contains some special features which have a direct
impact on the signals of the measurement:
– the way of signaling
– general warning and error messages
– special warning signs for early detection of functional limita-
tions
An important issue are the settings in the menu item Error
Handling in the Signal Parameter menu.
1 Signal Parameter Opens the menu for error handling and settings for the signal output
(page 3-329).
2 Reading Range The measuring range can be specified in this menu.
3 Signal Dependency Opens the menu in which the interference radiation detection or the
rapid switchover can be enabled.
4 Source Exchange Opens the menu in which the early warning for the source replace-
ment can be set.
To Next Page
Loading...
