SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
1 – 21
Volume 1 4 Transport and Assembly
1
4 Transport and Assembly
The weight of the source shielding may be up to several 100kg,
depending on the version. Please keep in mind:
• The bearing capacity of the vessel walls or the brackets must be
suitable for installation of the source with the shielding and the
detector. Otherwise, system parts may fall off and cause severe
injuries or bodily harm with fatal consequences.
• Make sure that the mechanical stability of the fixing devices
matches the weight of the shielding.
Please keep in mind:
– Never step under hovering loads while unloading heavy system
parts!
– Only use tested lifting equipment matching the transport
weights.
– Maintain adequate safety margin.
– Wear hard hat and safety shoes.
– Always ensure good stability for all types of use.
– Make use of the prepared mounting options.
– Work during assembly and installation of heavy and unwieldy
subassemblies should be carried out by at least two people.
– System components must be mounted vibration-free.
– Hold housing cover to prevent falling of housing cover when
opening and closing the terminal compartment.
To Next Page
Loading...
