BERTHOLD TECHNOLOGIES LB 480 - 2.28 I;O Setup

54733-10BA2L
3 – 354 02.2017
Menu Structure Volume 3
2.28 I/O Setup
Menu path: Device Config  Setup  I/O Setup.
This menu allows you to set the analog and digital inputs and out-
puts and the interfaces.
1 Current Output Opens the menu with the settings for the current output (page 3-
355).
2 Digital Output Opens the menu with the settings for the digital output (page 3-
357).
3 Digital Input Opens the menu with the settings for the digital input (page 3-
361).
4 HART Interface Opens the menu with the settings for the HART
®
interface (page 3-
362).