BERTHOLD TECHNOLOGIES LB 480 - Other Applicable Documents and Records; Detector Identification

SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
1 – 93
Volume 1 7 Functional Safety
1
7.3 Other Applicable Documents and
Records
Depending on the design of the measuring system, the following
documentation must be observed
The SIL conformity is certified in the attached certificate.
7.4 Detector Identification
SIL-certified detectors are marked on the nameplate with the des-
ignation "SIL" and in the LB number key in addition with an "S" (see
figure below).
Type Operating manual
Level measurement LB 480 Level measurement
ID No. 54733-10BA1L German
ID No. 54733-10BA2L English
Limit level measurement LB 480 Limit level measurement
ID No. 54733-20BA1S German
ID No. 54733-20BA2S English
Density measurement LB 480 Density measurement
ID No. 54733-30BA1D German
ID No. 54733-30BA2D English
Identification of a
SIL certified detector