54733-10BA2L
3 – 378 02.2017
Menu Structure Volume 3
5 Safety OFF Disables the safety mode. You need the password to disable the
safety mode.
If you disable the safety mode, the following settings are made
automatically:
– Write Protect is set to OFF
– Error Handling is set to NORMAL (see page 3-329).
6 Lock Device Status Indicates whether the detector is enabled or disabled for access to
the HART
®
interface by other users.
7 Lock/Unlock Device Locks or unlocks the detector to prevent access by other users to
the HART
®
interface.
2.50 Identification
Menu path: Device Config Identification.
This menu shows various detector parameters, such as model,
device ID, software and hardware revision.
1 Location Opens the menu showing information about the tag (page 3-378).
2 Device Information Opens the menu showing information about the detector (page 3-
379).
3 Device Revision Opens the menu showing the hardware and software revisions
(page 3-380).
2.51 Location
Menu path: Device Config Identification Location.
This menu shows information about the tag.
1 Tag Shows the tag number. You can edit information, any text is possi-
ble. Up to 8 characters.
2 Long tag Shows the tag number. You can edit information, any text is possi-
ble. Up to 32 characters.
3 Descriptor Shows a tag description. You can edit information, any text is pos-
sible.
4 Message Shows a message. You can edit information, any text is possible.
To Next Page
Loading...
