SENSseries LB 480
BERTHOLD TECHNOLOGIES GmbH & Co. KG
1 – 27
Volume 1 5 Explosion Protection
1
5.4 Safety Instructions
5.4.1 Safety Instructions for Assembly and Operat-
ing Personnel
Assembly, installation, commissioning, operation and maintenance
must only be carried out by authorized and trained personnel.
Before assembly/commissioning:
• Read the safety manual
• Read the operating manual
• Provide adequate training for assembly and operating person-
nel
• Ensure that the contents of the safety manual and the operat-
ing manual is fully understood by the relevant personnel.
If you are unclear:
• Contact the manufacturer.
•Repair
Repair Spare parts may solely be assembled by the BERTHOLD
TECHNOLOGIES service or by persons authorized by BERTHOLD
TECHNOLOGIES. If this is not possible, you must replace the entire
detector or return it to the manufacturer for repair.
To Next Page
Loading...
