54733-10BA2L
3 – 404 02.2017
5 Calibration Volume 3
5.3.4 Archiving Calibration Data
We generally recommend to archive both the calibration and all
other settings. This greatly simplifies and accelerates any necessary
exchange of the measuring system. Also, incorrect operation may
cause data loss and in this case archived data may be very helpful.
There are several ways to archive data.
• Fill out the parameter protocol in the Appendix to the operating
instructions
• Digital storage of data
Several options are available for digital storage, depending on the
communication interface and host used:
• LB 480-PC (Berthold specific program for the RS485 interface)
•HART
®
Communicator
• Siemens Simatic PDM
• AMS Emerson Process
See also Volume 3, chapter 1.5.
To Next Page
Loading...
