EasyManua.ls Logo

BERTHOLD TECHNOLOGIES LB 480 - Page 84

BERTHOLD TECHNOLOGIES LB 480
450 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54733BA26
1 – 84 02.2017
5 Explosion Protection Volume 1
To verify the availability of the Approved product, please refer to www.approvalguide.com
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals LLC. 1151 Boston-Providence Turnpike, Norwood, MA 02062 USA
T: +1 (1) 781 762 4300 F: +1 (1) 781 762 9375 E-mail: information@fmapprovals.com www.fmapprovals.com
F 348 (Mar 16) Page 1 of 3
CERTIFICATE OF CONFORMITY
1.
HAZARDOUS LOCATION ELECTRICAL EQUIPMENT PER CANADIAN REQUIREMENTS
2.
Certificate No:
FM16CA0144X
3.
Equipment:
(Type Reference and Name)
LB 480 Series Scintillation Measurement Equipment
4.
Name of Listing Company:
Berthold Technologies GmbH & Co. KG
5.
Address of Listing Company:
Calmbacher Strasse 22
75323 Bad Wildbad
Germany
6.
The examination and test results are recorded in confidential report number:
3054263 dated 22
nd
September 2016
7.
FM Approvals LLC, certifies that the equipment described has been found to comply with the following Approval
standards and other documents:
CAN/CSA-C22.2 No. 0.4:R2013, CSA-C22.2 No. 0.5:2016, CSA-C22.2 No. 25:R2014,
CSA-C22.2 No. 30:R2012, CAN/CSA-C22.2 No. 94:R2011, CAN/CSA-C22.2 No. 61010-1-12:2012
8.
If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to specific
conditions
of use specified in the schedule to this certificate.
9.
This certificate relates to the design, examination and testing of the products specified herein. The FM
Approvals surveillance audit program has further determined that the manufacturing
processes and quality
control procedures in place
are satisfactory to manufacture the product as examined, tested and Ap
proved.
10.
Equipment Ratings:
Explosionproof for Class I, Division 1, Groups B, C and D; Dust
-
ignitionproof for Class II, Division 1, Groups E, F
and G;
and
Class III, Division 1 hazardous locations, indoors and outdoors (Type 4X) with an ambient
temperatu
re rating of -40°C to +65°C (or +80°C).
Certificate issued by:
22 September 2016
J. E. Marquedant
Manager, Electrical Systems
Date

Table of Contents

Related product manuals