WHEELS-BRAKES-
SUSPENSIONS
6
Removal of the front brake system
CAUTION
Brake fluid is corrosive and will damage paintwork. Avoid contact with eyes and skin. In case of
accidental contact, wash the affected area with abundant running water and consult a doctor if
necessary.
Empty the brake circuit.
Unscrew the special screws (1) securing the brake hose to the master cylinder and recover the
sealing washers (2).
Remove the master cylinder.
Slip the screw (16) off and release the brake hose (3) from the clip on the steering plate.
Sub 6-9
To Next Page
Loading...
