Boss BR-532 - Track Editing - Exchanging Data; Exchanging Recorded Data (Track Exchange)

57
Editing the performance on a track (Track Editing)
Advanced Use
4. Turn the TIME/VALUE dial to select “ALL” and press
[ENTER].
fig.R08-25
5. Press PARAMETER [ ] [ ] to move the cursor,
and turn the TIME/VALUE dial to select the track/V-
Track to erase.
6. When you are ready to execute the erasure, press
[ENTER].
The display will ask “Are you sure?,” so that you can
confirm the operation.
7. Press [ENTER].
The erasure is executed.
8. Press [EXIT] several times to return to the Play page.
Exchanging recorded data
(Track Exchange)
Perform the procedure given below to exchange the recorded
data between two tracks.
Example: exchanging all the data on track 1 with all the
data on track 2
fig.R08-26
1. Press [UTILITY].
2. Press PARAMETER [ ] [ ] to move the cursor to
“TRK,” and press [ENTER].
fig.R08-02
3. Press PARAMETER [ ] [ ] to move the cursor to
“EXC,” and press [ENTER].
fig.R08-27
4. Press PARAMETER [ ] [ ] to move the cursor,
and turn the TIME/VALUE dial to select the two tracks/
V-Tracks to exchange data.
5. When you are ready to execute the exchange, press
[ENTER].
The exchange is executed.
6. Press [EXIT] several times to return to the Play page.
Track 1
Track 2
Track 1
Track 2
A
A
B
B
C
C
D
D
E
E
Time