Boss BR-532 - Tuner Settings; Setting the Reference Pitch

77
Tuning an instrument—Tuner
Advanced Use
Setting the reference pitch of
the tuner
The reference pitch refers to the frequency of the A4 key (i.e.,
the “A” key at the center of a piano keyboard) from the
instrument that serves as the reference pitch during
performances (e.g., piano).
On the BR-532, you can set the reference pitch of the tuner to
any value between 435 and 445 Hz.
You may change the setting as needed.
* This was set to 440 Hz when the unit was shipped from the
factory.
1. Press [TUNER] to change the display to that for the
tuner.
fig.R16-01
2. Turn the TIME/VALUE dial to change the standard
pitch.
3. To turn off the tuner, press [TUNER] again. You’re
returned to the Play screen.