Brocade Communications Systems FastIron X Series User Manual

The num-entries-to-skip parameter lets you display the table beginning with a specic entry number.
TABLE 22 CLI display of static ARP table
Field Description
Static ARP table size The maximum number of static entries that can be congured on the
device using the current memory allocation. The range of valid memory
allocations for static ARP entries is listed after the current allocation.
Index The number of this entry in the table. You specify the entry number when
you create the entry.
IP Address The IP address of the device.
MAC Address The MAC address of the device.
Port The port attached to the device the entry is for.
Displaying the forwarding cache
To display the IP forwarding cache, enter the following command at any CLI level.
device# show ip cache
Total number of cache entries: 3
D:Dynamic P:Permanent F:Forward U:Us C:Complex Filter
W:Wait ARP I:ICMP Deny K:Drop R:Fragment S:Snap Encap
IP Address Next Hop MAC Type Port Vlan Pri
1 192.168.1.11 DIRECT 0000.0000.0000 PU n/a 0
2 192.168.1.255 DIRECT 0000.0000.0000 PU n/a 0
3 255.255.255.255 DIRECT 0000.0000.0000 PU n/a 0
Syntax: show ip cache [ ip-addr | num ]
The ip-addr parameter displays the cache entry for the
specied IP address.
The num parameter displays the cache beginning with the row following the number you enter. For example, to begin displaying the
cache at row 10, enter the following command.
device# show ip cache 9
The show ip cache command displays the following information.
TABLE 23 CLI display of IP forwarding cache - Layer 3 switch
Field Description
IP Address The IP address of the destination.
Next Hop The IP address of the next-hop router to the destination. This eld
contains either an IP address or the value DIRECT. DIRECT means the
destination is either directly attached or the destination is an address on
this Brocade device. For example, the next hop for loopback addresses
and broadcast addresses is shown as DIRECT.
MAC The MAC address of the destination.
NOTE
If the entry is type U (indicating that the destination is this
Brocade device), the address consists of zeroes.
Type The type of host entry, which can be one or more of the following:
• D - Dynamic
• P - Permanent
• F - Forward
• U - Us
Displaying IP conguration information and statistics
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 131

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English