Brocade Communications Systems FastIron X Series User Manual

FastIron third generation modules
The default value of next hop entries on FastIron X Series devices with the following third generation modules installed is 16384. This
value is predened and not editable.
• SX-FI48GPP
• SX-FI-2XG
• SX-FI-8XG
• SX-FI-24HF
• SX-FI-24GPP
If the FastIron X Series device is installed with rst generation or second generation modules, the system automatically calculates the
default value for these modules.
Displaying Layer 3 system parameter limits
To display the Layer 3 system parameter defaults, maximum values, and current values, enter the show default value command at any
level of the CLI.
The following example shows output on a FastIron X Series with second generation modules.
device#show default value
sys log buffers:50 mac age time:300 sec telnet sessions:5
ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops
ip addr per intf:24
igmp group memb.:140 sec igmp query:60 sec
ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec
ospf transit delay:1 sec
System Parameters Default Maximum Current
ip-arp 4000 64000 4000
ip-static-arp 512 1024 512
some lines omitted for brevity....
hw-traffic-condition 50 1024 50
The following example shows output on a FastIron X Series with third generation modules.
device#show default value
sys log buffers:50 mac age time:300 sec telnet sessions:5
ip arp age:10 min bootp relay max hops:4 ip ttl:64 hops
ip addr per intf:24
igmp group memb.:140 sec igmp query:60 sec
ospf dead:40 sec ospf hello:10 sec ospf retrans:5 sec
ospf transit delay:1 sec
System Parameters Default Maximum Current
ip-arp 4000 64000 4000
ip-static-arp 512 1024 512
some lines omitted for brevity....
hw-traffic-condition 50 1024 50
Enabling or disabling routing protocols
This section describes how to enable or disable routing protocols. For complete
conguration information about the routing protocols,
refer to the respective chapters in this guide.
The Layer 3 code supports the following protocols:
• BGP4
• IGMP
Enabling or disabling routing protocols
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 147

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English