TABLE 52 show ipv6 rip output descriptions (continued)
Field Description
Split horizon/poison reverse The status of the RIPng split horizon and poison reverse features. Possible
status is "on" or "o."
Default routes The status of RIPng default routes.
Periodic updates/trigger updates The number of periodic updates and triggered updates sent by the RIPng
Brocade device.
Distribution lists The inbound and outbound distribution lists applied to RIPng.
Redistribution The types of IPv6 routes redistributed into RIPng. The types can include
the following:
• STATIC - IPv6 static routes are redistributed into RIPng.
• CONNECTED - Directly connected IPv6 networks are
redistributed into RIPng.
• BGP - BGP4+ routes are redistributed into RIPng.
• OSPF - OSPFv3 routes are redistributed into RIPng.
Displaying RIPng routing table
To display the RIPng routing table, enter the following command at any CLI level.
device# show ipv6 rip route
IPv6 RIP Routing Table - 4 entries:
ada::1:1:1:2/128, from fe80::224:38ff:fe8f:3000, e 1/3/4
RIP, metric 2, tag 0, timers: aging 17
2001:db8::/64, from fe80::224:38ff:fe8f:3000, e 1/3/4
RIP, metric 3, tag 0, timers: aging 17
bebe::1:1:1:4/128, from ::, null (0)
CONNECTED, metric 1, tag 0, timers: none
cccc::1:1:1:3/128, from fe80::768e:f8ff:fe94:2da, e 2/1/23
RIP, metric 2, tag 0, timers: aging 50
Syntax: show ipv6 rip route [
ipv6-prex/prex-length | ipv6-address ]
The ipv6-prex/prex-length parameters restrict the display to the entries for the specied IPv6 prex. You must specify the ipv6-prex
parameter in hexadecimal using 16-bit values between colons as documented in RFC 2373. You must specify the prex-length
parameter as a decimal value. A slash mark (/) must follow the ipv6-prex parameter and precede the prex-length parameter.
The ipv6-address parameter restricts the display to the entries for the specied IPv6 address. You must specify this parameter in
hexadecimal using 16-bit values between colons as documented in RFC 2373.
TABLE 53 show ipv6 rip route output descriptions
Field Description
IPv6 RIP Routing Table entries The total number of entries in the RIPng routing table.
ipv6-prex /prex-length
ipv6-address
The IPv6 prex and prex length.
The IPv6 address.
Next-hop router The next-hop router for this Brocade device. If :: appears, the route is
originated locally.
Interface The interface name. If "null" appears, the interface is originated locally.
Source of route The source of the route information. The source can be one of the
following:
• RIP - routes learned by RIPng.
• CONNECTED - IPv6 routes redistributed from directly
connected networks.
Displaying RIPng information
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 221