Brocade Communications Systems FastIron X Series User Manual

5. Enter the show ipv6 bgp neighbors rib-out-routes command.
device# show ipv6 bgp neighbors 2001:db8::10 rib-out-routes
There are 150 RIB_out routes for neighbor 2001:db8::10
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST E:EBGP I:IBGP L:LOCAL
Prefix Next Hop MED LocPrf Weight Status
1 fd80:122:122:122:101:101:0:122/128 ::
0 100 101 BL
AS_PATH:
2 fd80:122:122:122:103:103:0:122/128 ::
0 100 103 BL
AS_PATH:
3 fd80:122:122:122:105:105:0:122/128 ::
0 100 105 BL
AS_PATH:
4 131::1/128 :: 1 100 32768 BL
AS_PATH:
5 2001:122:131:125:131:1::/96 2001:3002::732
1 100 0 BE
AS_PATH: 65530
6 2001:abcd:1234:1234:1:2:1:0/112 2001:3002::733
1 100 0 BE
AS_PATH: 65530
7 2001:abcd:1234:1234:1:2:2:0/112 2001:3002::733
1 100 0 BE
AS_PATH: 65530
This example shows information about BGP4+ outbound RIB routes.
Clearing BGP4+ dampened paths
BGP4+ suppressed routes can be reactivated using a CLI command.
The show ipv6 bgp dampened-paths command is entered to verify that there are BGP4+ dampened routes. The clear ipv6 bgp
dampening command is entered to reactivate all suppressed BGP4+ routes. The show ipv6 bgp dampened-paths command is re-
entered to verify that the suppressed BGP4+ routes have been reactivated.
1. Enter the exit command until you return to Privileged EXEC mode.
device(config)# exit
2. Enter the show ipv6 bgp dampened-paths command to display all BGP4+ dampened routes.
device# show ipv6 bgp dampened-paths
Network From Flaps Since Reuse Path
*d 2001:db8:8::/45 2001:db8:1::1 1 0 :1 :14 0 :2 :20 100 1002 1000
*d 2001:db8:1::/48 2001:db8:1::1 1 0 :1 :14 0 :2 :20 100 1002 1000
*d 2001:db8:4::/46 2001:db8:1::1 1 0 :1 :14 0 :2 :20 100 1002 1000
*d 2001:db8:2::/47 2001:db8:1::1 1 0 :1 :14 0 :2 :20 100 1002 1000
*d 2001:db8:0:8000::/49 2001:db8:1::1 1 0 :1 :14 0 :2 :20 100 1002 1000
*d 2001:db8:17::/64 2001:db8:1::1 1 0 :1 :18 0 :2 :20 100
3. Enter the clear ipv6 bgp dampening command to reactivate all suppressed BGP4+ routes.
device# clear ipv6 bgp dampening
4. Enter the show ipv6 bgp dampened-paths command to verify that there are no BGP4+ dampened routes.
device# show ipv6 bgp dampened-paths
device#
Conguring BGP4+
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 505

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English