Brocade Communications Systems FastIron X Series User Manual

TABLE 78 show ipv6 ospf neighbor router-id output descriptions (continued)
Field Description
LS Update Received The number of times the neighbor received link-state updates from the
device.
Displaying routes redistributed into OSPFv3
You can display all IPv6 routes or a specied IPv6 route that the device has redistributed into OSPFv3.
To display all IPv6 routes that the device has redistributed into OSPFv3, enter the following command at any level of the CLI.
device# show ipv6 ospf redistribute route
Id Prefix Protocol Metric Type Metric
1 5100::192:213:163:0/112 Connect Type-2 0
2 5100:213:213:0:192:213:1:0/112 Connect Type-2 0
Syntax: show ipv6 ospf redistribute route [
ipv6-prex]
The ipv6-prex parameter species an IPv6 network prex. (You do not need to specify the length of the prex.)
For example, to display redistribution information for the prex 2001:db8::, enter the following command at any level of the CLI.
device# show ipv6 ospf redistribute route 2001:db8::
Id Prefix Protocol Metric Type Metric
1 2001:db8::/32 Static Type-2 1
TABLE 79 show ipv6 ospf redistribute route output descriptions
This eld Displays
ID An ID for the redistributed route.
Prex The IPv6 routes redistributed into OSPFv3.
Protocol The protocol from which the route is redistributed into OSPFv3.
Redistributed protocols can be the following:
• BGP - BGP4+.
• RIP - RIPng.
• Static - IPv6 static route table.
• Connected - A directly connected network.
Metric Type The metric type used for routes redistributed into OSPFv3. The metric
type can be the following:
• Type-1 - Species a small metric (2 bytes).
• Type-2 - Species a big metric (3 bytes).
Metric The value of the default redistribution metric, which is the OSPF cost of
redistributing the route into OSPFv3.
Displaying OSPFv3 route information
You can display the entire OSPFv3 route table for the device or only the route entries for a specied destination.
To display the entire OSPFv3 route table for the device, enter the following command at any level of the CLI.
device# show ipv6 ospf route
Current Route count: 309
Intra: 304 Inter: 4 External: 1 (Type1 0/Type2 1)
Equal-cost multi-path: 56
OSPF Type: IA- Intra, OA - Inter, E1 - External Type1, E2 - External Type2
Destination Cost E2Cost Tag Flags Dis
E2 ::/0 2 1 0 00000003 110
Next_Hop_Router Outgoing_Interface Adv_Router
Displaying OSPFv3 information
FastIron Ethernet Switch Layer 3 Routing
334 53-1003627-04

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English