How command information is presented in this guide
For all new content supported in FastIron Release 08.0.20 and later, command information is documented in a standalone command
reference guide.
In an eort to provide consistent command line interface (CLI) documentation for all products, Brocade is in the process of completing a
standalone command reference for the FastIron platforms. This process involves separating command syntax and parameter
descriptions from conguration tasks. Until this process is completed, command information is presented in two ways:
• For all new content supported in FastIron Release 08.0.20 and later, the CLI is documented in separate command pages
included in the FastIron Command Reference. Command pages are compiled in alphabetical order and follow a standard
format to present syntax, parameters, usage guidelines, examples, and command history.
NOTE
Many commands from previous FastIron releases are also included in the command reference.
• Legacy content in conguration guides continues to include command syntax and parameter descriptions in the chapters where
the features are documented.
If you do not nd command syntax information embedded in a conguration task, refer to the FastIron Command Reference.
How command information is presented in this guide
FastIron Ethernet Switch Layer 3 Routing
22 53-1003627-04
To Next Page
Loading...
Need help?
General
