TABLE 72 OSPFv3 detailed database information elds (continued)
This eld Displays
Bits The bit can be set to one of the following:
• E - If bit E is set, a Type 2 external metric. If bit E is zero, a Type 1 external metric.
• F - A forwarding address is included in the LSA.
• T - An external route tag is included in the LSA.
Metric The cost of this route, which depends on bit E.
Prex Options An 8-bit eld describing various capabilities associated with the prex.
Referenced LS Type If non-zero, an LSA with this LS type is associated with the LSA.
Prex The IPv6 prex included in the LSA.
Link LSA (Type 8) (Link) Fields
Router Priority The router priority of the interface attaching the originating router to the link.
Options The set of options bits that the router would like set in the network LSA that will be originated for the
link.
Link Local Address The originating router’s link-local interface address on the link.
Number of Prex The number of IPv6 address prexes contained in the LSA.
Prex Options An 8-bit eld of capabilities that serve as input to various routing calculations:
• NU - The prex is excluded from IPv6 unicast calculations.
• LA - The prex is an IPv6 interface address of the advertising router.
• MC - The prex is included in IPv6 multicast routing calculations.
• P - NSSA area prexes are readvertised at the NSSA area border.
Prex The IPv6 prex included in the LSA.
Intra-Area Prex LSAs (Type 9) (Iap) Fields
Number of Prex The number of prexes included in the LSA.
Referenced LS Type, Referenced LS ID Identies the router-LSA or network-LSA with which the IPv6 address prexes are associated.
Referenced Advertising Router The address of the neighboring router that advertised the route.
Prex Options An 8-bit eld describing various capabilities associated with the prex.
Metric The cost of using the advertised prex.
Prex The IPv6 prex included in the LSA.
Number of Prex The number of prexes included in the LSA.
Displaying IPv6 interface information
You can use the following command to display a summary of IPv6 Interface information.
device# show ipv6 interface
Type Codes - I:ISIS O:OSPF R:RIP
Interface Stat/Prot IGPs IPv6 Address VRF
eth 1/3/20 up/up fe80::2c0:12ff:fe34:5073 default-vrf
2001:db8:1000::1/64
2001:db8:1000::/64[Anycast]
Syntax: show ipv6 interface [ethernet unit/slot/port | loopback number | tunnel number | ve number]
The ethernet, loopback, tunnel, and ve parameters specify the interface for which to display information.
If you specify an Ethernet interface, also specify the unit, slot and port numbers associated with the interface. If you specify a loopback,
tunnel, or VE interface, also specify the number associated with the interface.
Displaying OSPFv3 information
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 325