Brocade Communications Systems FastIron X Series User Manual

TABLE 72 OSPFv3 detailed database information elds (continued)
This eld Displays
R - The originator is an active router.
DC -The device handles demand circuits.
Type The type of interface. Possible types can be the following:
Point-to-point - A point-to-point connection to another router.
Transit - A connection to a transit network.
Virtual link - A connection to a virtual link.
Metric The cost of using this router interface for outbound trac.
Interface ID The ID assigned to the router interface.
Neighbor Interface ID The interface ID that the neighboring router has been advertising in hello packets sent on the
attached link.
Neighbor Router ID The router ID (IPv4 address) of the neighboring router that advertised the route. (By default, the
router ID is the IPv4 address congured on the lowest numbered loopback interface. If the device
does not have a loopback interface, the default router ID is the lowest numbered IPv4 address
congured on the device.)
Network LSA (Type 2) (Net) Fields
Options A 24-bit eld that enables IPv6 OSPF routers to support the optional capabilities. When set, the
following bits indicate the following:
V6 - The device should be included in IPv6 routing calculations.
E - The device oods AS-external-LSAs as described in RFC 2740.
MC - The device forwards multicast packets as described in RFC 1586.
N - The device handles type 7 LSAs as described in RFC 1584.
R - The originator is an active router.
DC -The device handles demand circuits.
Attached Router The address of the neighboring router that advertised the route.
Inter-Area Prex LSA (Type 3) (Inap) Fields
Metric The cost of the route.
Prex Options An 8-bit eld describing various capabilities associated with the prex.
Prex The IPv6 prex included in the LSA.
Inter-Area Router LSA (Type 4) (Inar) Fields
Options A 24-bit eld that enables IPv6 OSPF routers to support the optional capabilities. When set, the
following bits indicate the following:
V6 - The device should be included in IPv6 routing calculations.
E - The device oods AS-external-LSAs as described in RFC 2740.
MC - The device forwards multicast packets as described in RFC 1586.
N - The device handles type 7 LSAs as described in RFC 1584.
R - The originator is an active router.
DC -The device handles demand circuits.
Metric The cost of the route.
Destination Router ID The ID of the router described in the LSA.
AS External LSA (Type 5) (Extn) Fields
Displaying OSPFv3 information
FastIron Ethernet Switch Layer 3 Routing
324 53-1003627-04

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English