TABLE 30 IPv6 CLI command support (continued)
IPv6 command Description Switch code Router code
ipv6 rip Congures RIPng parameters on an
interface
X
ipv6 route Congures an IPv6 static route. X
ipv6 router Enables an IPv6 routing protocol. X
ipv6 trac-lter Applies an IPv6 ACL to an
interface.
X X
ipv6 unicast-routing Enables IPv6 unicast routing. X
log host ipv6 Congures the IPv6 Syslog server. X X
ping ipv6 Performs an ICMP for IPv6 echo
test.
X X
show ipv6 Displays some global IPv6
parameters, such IPv6 DNS server
address.
X X
show ipv6 access-list Displays congured IPv6 access
control lists.
X X
show ipv6 cache Displays the IPv6 host cache. X
show ipv6 interface Displays IPv6 information for an
interface.
X
show ipv6 mld-snooping Displays information about MLD
snooping.
X X
show ipv6 neighbor Displays the IPv6 neighbor table. X X
show ipv6 ospf Displays information about OSPF
V3.
X
show ipv6 prex-lists Displays the congured IPv6 prex
lists.
X
show ipv6 rip Displays information about RIPng. X
show ipv6 route Displays IPv6 routes. X
show ipv6 router Displays IPv6 local routers. X
show ipv6 tcp Displays information about IPv6
TCP sessions.
X X
show ipv6 trac Displays IPv6 packet counters. X X
show ipv6 tunnel Displays information about IPv6
tunnels
X X
snmp-client ipv6 Restricts SNMP access to a certain
IPv6 node.
X X
snmp-server host ipv6 Species the recipient of SNMP
notications.
X X
telnet Enables a Telnet connection from
the Brocade device to a remote
IPv6 host using the console.
X X
traceroute ipv6 Traces a path from the Brocade
device to an IPv6 host.
X X
web access-group ipv6 Restricts Web management access
to certain IPv6 hosts as determined
by IPv6 ACLs.
X X
web client ipv6 Restricts Web management access
to certain IPv6 hosts.
X X
IPv6 CLI command support
FastIron Ethernet Switch Layer 3 Routing
156 53-1003627-04
To Next Page
Loading...
Need help?
General
