Brocade Communications Systems FastIron X Series User Manual

Syntax: clear ipv6 dhcp-relay delegated-prexes { vrf vrf-name } { X:X::X:X/M | all | interface interface-id }
The vrfvrf-name parameter is used to clear the DHCPv6 delegated prexes for a specic VRF. If this parameter is not provided, then the
information for the default VRF is cleared.
The X:X::X:X/M parameter is used to clear the specied delegated prex and remove the corresponding route permanently from the
router.
The all parameter is used to clear all the delegated prexes and remove the corresponding routes permanently from the router for the
VRF.
The interfaceinterface-id parameter is used to clear all the delegated prexes and remove the corresponding routes permanently from
the router for the specied outgoing interface.
Clearing the DHCPv6 packet counters
To clear all DHCPv6 packet counters, use the clear ipv6 dhcp-relay statistics command at the privilege level.
device# clear ipv6 dhcp-relay statistics
Syntax: clear ipv6 dhcp-relay statistics
DHCPv6 Relay Agent Prex Delegation Notication
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 199

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English