Brocade Communications Systems FastIron X Series User Manual

2. Enter the show ipv6 bgp attribute-entries command.
device# show ipv6 bgp attribute-entries
Total number of BGP Attribute Entries: 2
1 Next Hop : 2001::1 MED :1 Origin:IGP
Originator:0.0.0.0 Cluster List:None
Aggregator:AS Number :0 Router-ID:0.0.0.0 Atomic:None
Local Pref:1 Communities:Internet
AS Path : (length 0)
Address: 0x1205c75c Hash:268 (0x01000000)
Links: 0x00000000, 0x00000000
Reference Counts: 2:0:0, Magic: 1
2 Next Hop : :: MED :1 Origin:IGP
Originator:0.0.0.0 Cluster List:None
Aggregator:AS Number :0 Router-ID:0.0.0.0 Atomic:None
Local Pref:100 Communities:Internet
AS Path : (length 0)
AsPathLen: 0 AsNum: 0, SegmentNum: 0, Neighboring As: 0, Source As 0
Address: 0x1205c7cc Hash:365 (0x01000000)
Links: 0x00000000, 0x00000000
Reference Counts: 1:0:1, Magic: 2
This example shows information about two route-attribute entries that are stored in device memory.
3. Enter the show ipv6 bgp peer-group command.
device# show ipv6 bgp peer-group
1 BGP peer-group is P1, Remote AS: 1
Address family : IPV4 Unicast
activate
Address family : IPV4 Multicast
no activate
Address family : IPV6 Unicast
activate
Address family : IPV6 Multicast
no activate
Address family : VPNV4 Unicast
no activate
Address family : L2VPN VPLS
no activate
Members:
IP Address: 2001::1
IP Address: 2001:0:0:1::1
IP Address: 10.1.0.1
This example shows output for a peer group called “P1”.
Conguring BGP4+
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 501

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English