The following example displays the output of the show ipv6 vrrp-extended stat ve command:
device# show ipv6 vrrp-extended stat ve 30
Interface ethernet v30
rxed vrrp header error count = 0
rxed vrrp auth error count = 0
rxed vrrp auth passwd mismatch error count = 0
rxed vrrp vrid not found error count = 0
VRID 11
rxed arp packet drop count = 0
rxed ip packet drop count = 0
rxed vrrp port mismatch count = 0
rxed vrrp ip address mismatch count = 0
rxed vrrp hello interval mismatch count = 0
rxed vrrp priority zero from master count = 0
rxed vrrp higher priority count = 0
transitioned to master state count = 2
transitioned to backup state count = 2
total number of vrrp-extended packets received = 0
backup advertisements received = 0
total number of vrrp-extended packets sent = 61
backup advertisements sent = 0
TABLE 108 Output
eld descriptions
Field Description
Interface statistics
Interface The interface on which VRRP or VRRP-E is congured. If VRRP or
VRRP-E is congured on more than one interface, the display lists the
statistics separately for each interface.
rxed vrrp header error count The number of VRRP or VRRP-E packets received by the interface that
had a header error.
rxed vrrp auth error count The number of VRRP or VRRP-E packets received by the interface that
had an authentication error.
rxed vrrp auth passwd mismatch error count The number of VRRP or VRRP-E packets received by the interface that
had a password value that does not match the password used by the
interface for authentication.
rxed vrrp vrid not found error count The number of VRRP or VRRP-E packets received by the interface that
contained a VRID that is not congured on this interface.
VRID statistics
rxed arp packet drop count The number of ARP packets addressed to the VRID that were dropped.
rxed ip packet drop count The number of IP packets addressed to the VRID that were dropped.
rxed vrrp port mismatch count The number of packets received that did not match the conguration for
the receiving interface.
rxed vrrp ip address mismatch count The number of packets received that did not match the congured IP
addresses.
rxed vrrp hello interval mismatch count The number of packets received that did not match the congured Hello
interval.
rxed vrrp priority zero from master count Indicates that the current Master has resigned.
rxed vrrp higher priority count The number of VRRP or VRRP-E packets received by the interface that
had a higher backup priority for the VRID than this Layer 3 switch backup
priority for the VRID.
transitioned to master state count The number of times this Layer 3 switch has changed from the backup
state to the master state for the VRID.
transitioned to backup state count The number of times this Layer 3 switch has changed from the master
state to the backup state for the VRID.
total number of vrrp packets received The number of VRRP or VRRP-E advertisement packets received for a
VRID on a specic interface.
Displaying VRRP and VRRP-E information
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 551
To Next Page
Loading...
Need help?
General
