Syntax: show ip dhcp-server [ address-pool name | address-pools ]
• address-pools - If you enter address-pools, the display shows all address pools
• address-pool name - Displays information about a specic address pool
TABLE 13 show ip dhcp-server address-pools output descriptions
Field Description
Pool name The name of the address pool
Time elapsed since last save The time that has elapsed since the last save.
Total number of active leases The number of leases that are currently active.
Address pool state The state of the address pool (active or inactive).
IP Address exclusions IP addresses that are not included in the address pool
Pool congured options (as described below)
bootle The name of the bootle
dhcp-server-router The address of the DHCP server router
dns-server The address of the dns server
domain-name The name of the domain
lease The identier for the lease
netbios-name server The address of the netbios name server
network The address of the network
next-bootstrap-server The address of the next-bootstrap server
tftp-server The address of the TFTP server
Displaying lease-binding information in ash memory
The show ip dhcp-server ash command displays the lease-binding database that is stored in ash memory.
device# show ip dhcp-server flash
device# show ip dhcp-server flash
Address Pool Binding:
IP Address Client-ID/ Lease expiration Type
Hardware address
192.168.1.2 0000.005d.a440 0d:0h:18m:59s Automatic
192.168.1.3 0000.00e1.26c0 0d:0h:19m:8s Automatic
Syntax:show ip dhcp-server
ash
TABLE 14 show ip dhcp-server
ash output descriptions
Field Description
IP address The IP address of the ash memory lease-binding database
Client-ID/Hardware address The address of the client
Lease expiration The time when the lease will expire
Type The type of lease
Conguring IP parameters - Layer 3 switches
FastIron Ethernet Switch Layer 3 Routing
94 53-1003627-04
To Next Page
Loading...
Need help?
General
