User Manual
Table 9-5. Recommended separation distances between portable and mobile RF
communications equipment and the ICEfx System
Recommended separation distances between
portable and mobile RF communications equipment and the ICEfx System
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the ICEfx System as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum
output power
of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
80 MHz to 800 MHz 800 MHz to 2,5 GHz
0,01
0,1
1
10
100
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE 1:
applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
To Next Page
Loading...