4-22 User Manual
Setting Description
Temperature Units
Select the temperature units displayed for MTS sensors and CX
needles.
Clock Type
Select the clock type (12 or 24 hour). The clock type can be changed
by administrative or service personnel.
Inactivity Timeout
Select the desired duration from 30 to 180 minutes that the system
can be inactive before requiring you to re-enter your password.
Idle Timer
Turn On or O the timer that tracks system inactivity. Turn On this
option if you want the system to timeout when it is inactive for a
specied Inactivity Timeout value.
Upload
Registration
Use the drop-down menu to enable or disable the option to upload
registration data with the procedure reports. By default, registration
data is not uploaded. This function is only available to administrative
or service personnel.
Button Sound
Click
Turn On or O the clicking sound when a button is pressed.
MTS Display
Coldest
Turn On or O display of the coldest MTS sensor location. If turned
On, the coldest MTS sensor is highlighted in blue.
Number MTS Set the number of MTS sensor locations to display.
Low Cylinder Alert
Select the desired reminder interval (0 to 15 minutes) for the Gas
Indicator to display an alert that the estimated remaining volume in
the argon cylinder is low.
Displays Needle
Temperatures
Turn On or O the temperature display for CX needles.
Cycles Select the option to program cycles.
To Next Page
Loading...