BTG ICEfx - Page 86

8-14 User Manual
Message Reason for Appearance / Solutions
20-03 Test All
• You selected to control all needles simultaneously
• Do you want to initiate test in all needles now?
YES NO
Reason for Appearance:
User selected Test button in ALL channel
to control all active channels.
Solutions:
Conrm testing of all connected needles.
20-04 Freeze All Channels
• You selected to control all needles simultaneously
• Do you want to initiate [x%] freeze for all active
needles now?
YES NO
Reason for Appearance:
User selected Freeze button in ALL
channel to control all active channels.
Solutions:
Conrm initiation of freeze phase on all
active needles.
20-06 Thaw All Channels
• You selected to control all needles simultaneously
• Do you want to initiate thaw for all active needles
now?
YES NO
Reason for Appearance:
User selected Thaw button in ALL channel
to control all active channels.
Solutions:
Conrm initiation of thawing on all active
needles.
20-07 Stop All Channels
• You selected to control all needles simultaneously
• Do you want to stop activity in all needles now?
YES NO
Reason for Appearance:
User selected Stop button in ALL channel
to control all active channels.
Solutions:
Select whether to stop activity for all active
needles.
20-18 System Shutdown
• Do you want to shut down the system?
YES NO
Reason for Appearance:
User selected Shutdown in the Login
Screen to power down the system.
Solutions:
Conrm shutdown of the system.
Reference Section 6.1 for the shutdown
procedure.