4
Make your selection in the EPrint Target list.
5
Make your selection in the FPrint Quality list.
6
Access the Page Setup pane.
7
Select and click a roll paper in the APaper Source list.
8
Select the paper width of the roll loaded in the printer for BRoll Width. In this case, 16 in. (406.4mm) is selec-
ted.
9
In CPage Size, make sure 100*500 is displayed, as registered in Page Setup.
10
Select the DEnlarged/Reduced Printing check box.
11
Click FFit Roll Paper Width.
12
Confirm the print settings, and click MPrint to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.349
Printing on Non-Standard Paper Sizes
Printing on Non-Standard Paper Sizes
For printing on non-standard size paper, first register the paper size in the printer driver.
Once you register a paper size, you then can select it repeatedly from the paper size list. The paper size can be set up
to 18.0 m.
Note
• In Windows, although you can even set Custom Size for the paper size, the maximum settable size is 3.2 m. The setting of
Custom Size is disabled when you exit the application software.
For instructions on specifying non-standard paper sizes for printing, refer to the following topics, as appropriate for your
computer and operating system.
•
Printing on Non-Standard Paper Sizes (Windows) âž” P.105
•
Printing on Non-Standard Paper Sizes (Mac OS) âž” P.109
Printing on Non-Standard Paper Sizes (Windows)
Printing on Non-Standard Paper Sizes (Windows)
For printing on non-standard size paper, first register the paper size in the printer driver.
Call a non-standard paper size registered in the printer driver with Custom Paper Size.
iPF6400S
Printing on Non-Standard Paper Sizes
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
105
To Next Page
Loading...
Need help?
General